Updated to the 1.1.0 firmware on my mesh - multiple nodes both ubiquiti and linksys..

In 1.0.0, I had been utilizing laptops with Linux and OLSRD - this allows both extension of the mesh as well as access to web tools like trivnetdb, etc - directly from a laptop rather than having to pair each laptop up with a WRT router or whatnot.   Also quite useful to temporarily bridge an isolated BBHN mesh to the internet via a USB 3G phone or equivalent. 

In the new firmware olsrd on a laptop complains that all packets from the mesh are insane... :-)

[ENC]Rejecting packet from 10.118.205.197
[ENC]Packet not sane!

Has anyone else had this issue?   This is after modeling the config file after the BBHN configuration including the olsrd_secure_key

For interoperability with other BBHN nodes I would rather not turn off the secure plugin, although it might be tempting if no solution eventually presents itself.  

I thought this might be related to time synchronization but that appears to be ok.  

Any suggestions?

First off:

Just using this just to pair PC's to a node would pollute  the RF.  This is unwise and highly recomended against.

Put up a wireless access point on channel 11 instead to do this. It is cleaner for the RF network and will have better performance.

Beyond that there *may* be a bug in OLSR as distributed by many distributions that does not function correctly on 64bit systems (unconfirmed)