I have just created my first two nodes.

The node on the WRT54GL v. 1.1 works without issue.

My WRT54Gv2 will assign an IP address of 169.254.127.137 with a mask of 255.255.0.0 or similar.

about 5-8 minutes later it will assign a 10.x ip address and my other node will see it.

This node never picks up my granstream adapters or assigns them an IP address but they work perfectly on the other node.  No static IP is assigned on any adapter or node.

This node also will not recognize my computer and assign it an IP unless it is plugged in before booting up the router.

Any suggestions on how to get it to behave like the other node, recognize the granstream adapter and recognize the computer if I plug it in after bootup?

I am just getting into Mesh, any help is appreciated.

Andrew

AK4FA

If you are just testing try the 3.0.0 beta it likely has the fix you need in it.

Thanks, That version seemed to clear up the problems, I'll do more testing to verify everything is working correctly.

Andrew