Broadband-Hamnet™ Forum :: Firmware
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :DTD and Beta v3.. 2014-10-02- 07:46:08 
K3MMB
Member
Joined: 2014-03-16- 19:00:57
Posts: 71
Location: 

How does dtd work with beta? I am missing something, U5 plugged into L2.4 and no workie. I need to do what to fix it?

73 de mike
IP Logged
 Subject :Re:DTD and Beta v3.. 2014-10-02- 09:53:39 
AE6XE
Member
Joined: 2013-11-05- 00:09:51
Posts: 116
Location: 

DTD on linksys was disabled in v3.0.0. The linksys ports stop recognizing some devices with dual use of DTD and LAN on the same ports. DTD was disabled as a workaround for now.

To enable:

http://ubnt.hsmm-mesh.org/products/BBHN/wiki/HowTo/Enable%20DTDLINK%20on%20Linksys

If after tuning on DTD, you have a device that linksys stops recognizing, then edit the /etc/vlan file to only include a given port in DTD (vlan2) or in the LAN (vlan0 or untagged), but not both.

Joe AE6XE
IP Logged
Last Edited On: 2014-10-02- 09:54:51 By AE6XE for the Reason formatted
 Subject :Re:DTD and Beta v3.. 2014-10-02- 13:02:41 
K3MMB
Member
Joined: 2014-03-16- 19:00:57
Posts: 71
Location: 

I did edit the Linksys node as described. Still no joy.


line number 7 states I should delete a line from the network file. This did not appear in the file.


 
IP Logged
 Subject :Re:DTD and Beta v3.. 2014-10-03- 07:18:01 
AE6XE
Member
Joined: 2013-11-05- 00:09:51
Posts: 116
Location: 

If this line “option auto no” does not appear in "/etc/config.mesh/network" as shown below, then it is likely the firmware version of bbhn you have loaded is not v3.0.0.

config interface dtdlink

option ifname "eth0.2"

option proto static

option ipaddr

option netmask 255.0.0.0

option auto no
IP Logged
Last Edited On: 2014-10-03- 07:19:22 By AE6XE for the Reason
 Subject :Re:DTD and Beta v3.. 2014-10-07- 13:54:21 
K3MMB
Member
Joined: 2014-03-16- 19:00:57
Posts: 71
Location: 

got it
IP Logged
Page # 


Powered by ccBoard


SPONSORED AD: