Broadband-Hamnet™ Forum :: Problems & Answers
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :LocalAP:8080.. 2014-12-08- 14:12:18 
KC0NUK
Member
Joined: 2014-12-02- 17:47:35
Posts: 2
Location: 

I have converted 2 WRT54GL V1.1 from mesh node to AP now i cant access them at all.  I have tried Every trick in the  book.  NOTHING.  my browser times out everytime i try to connect to either one of them, i have them both connected to a mesh node that is operational.  any suggestions??  btw  my ip from ip config shows 169.xxx.xxx.xxx  im not even getting a 10.xxx.xxx.xxx
IP Logged
 Subject :Re:LocalAP:8080.. 2014-12-08- 14:28:03 
AE5CA
Member
Joined: 2012-05-19- 21:52:33
Posts: 81
Location: 

Assuming you do not have anything else connected to the node, you do not have an DHCP server connected to get an IP. Set a Static ip on your computer. Use 172.27.0.xx. xx should not be 1 or 2. Connect a CAT5 from your computer to a lan port. From your web browser go to 172.27.0.2:8080 and you should be in. Clint, AE5CA

Updated to correct ip address to 172.27.0.xx and 172.27.0.2:8080
IP Logged
Last Edited On: 2014-12-08- 15:19:02 By AE5CA for the Reason
Page # 


Powered by ccBoard


SPONSORED AD: