Broadband-Hamnet™ Forum :: General
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :Help understanding an entry on the mesh status page.. 2015-01-22- 12:56:55 
WB6TAE
Member
Joined: 2014-05-01- 23:48:12
Posts: 70
Location: 

Running 3.0.0.

On my local mesh status page, under remote-nodes, I see the following entries:

WB6TAE-2 7.27
dtdlink.WB6TAE-2.local.mesh 7.27

The problem is, wb6tae-2 is a stand-alone NanoStation-M2. I.e. the node is a mile from me and it is connected to nothing, other than the PoE power supply (and the power supply has nothing plugged into the LAN port). I can only access the node through a neighbor.

So, any ideas why I am seeing a dtdlink for this node.  BTW, the dtdlink is not always displayed, seems to come and go.
IP Logged
 Subject :Re:Help understanding an entry on the mesh status page.. 2015-01-23- 12:49:58 
KG6JEI
Member
Joined: 2013-12-02- 19:52:05
Posts: 516
Location: 

Sounds like it might be a display bug of some sort.

If you could run "telnet localnode 2006" and pass me the output along with a copy of the contents of /var/run/hosts_olsr I can run it through the code and watch what is happening and add it to a ticket to get fixed.
IP Logged
Note: Most posts submitted from iPhone
Page # 


Powered by ccBoard


SPONSORED AD: