Broadband-Hamnet™ Forum :: Firmware
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :Developing firmware for other hardware.. 2015-03-05- 10:41:14 
zl1cqo
Member
Joined: 2014-12-18- 17:02:15
Posts: 29
Location: New Zealand
 

Hi folks,

I am interested in having a go at developing firmware for other platforms.  Does anyone have any links to information for getting started?

I have some TP-link hardware (I know its not quite up to the Ubiquiti stuff but I have some kicking around doing nothing) that I have flashed with a few different versions of openwrt and had a go at setting up OSLR manually on.  They are WR841NDs so I think are ar71xx based so hopefully not too obscure.

Any advice?

Thanks

Jon
IP Logged
 Subject :Re:Developing firmware for other hardware.. 2015-03-07- 15:38:17 
AE6XE
Member
Joined: 2013-11-05- 00:09:51
Posts: 116
Location: 
Jon, I went through the process of setting up the firmware builds not too long ago. If you can send me email at ae6xe@soara.org, we can sync up. There are a few other posts in the forum to google on this subject as well. Joe AE6XE
IP Logged
 Subject :Re:Re:Developing firmware for other hardware.. 2015-03-09- 12:22:39 
zl1cqo
Member
Joined: 2014-12-18- 17:02:15
Posts: 29
Location: New Zealand
 
Thanks Joe, I have sent you an email. The other thing I would like to have a go at is porting the current firmware to the x86 platform. This could be very good for vtun servers as it can have a lot more capacity. I managed to get OSLRD running on an basic Openwrt install in VMware but it was a bit unstable and kept dropping off the mesh. Jon
IP Logged
Page # 


Powered by ccBoard


SPONSORED AD: