Broadband-Hamnet™ Forum :: Hardware
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :WRT54G-EU.. 2012-02-22- 18:54:33 
WB9RIM
Member
Joined: 2012-02-08- 03:06:31
Posts: 5
Location: Evansville In

I have been seeing routers listed on Ebay as WRT54G-EU I'm a little confused is this a different model from the WRT54G or are they incorrectly listing some other number on the router as the model number? I don't want to buy somthing listed as say a "WRT54G-EU V2.0" and have it be somthing I can't use.

  Thanks

      Danny WB9RIM
IP Logged
 Subject :Re:WRT54G-EU.. 2012-02-23- 03:50:41 
KC4BQK
Member
Joined: 2010-10-09- 10:20:10
Posts: 34
Location: Henderson KY
 
The "EU" is for Europe firmware. If it is a version 1-4 there should be no problem. Get the serial number and check it to be sure. 73 Jim KC4BQK
IP Logged
 Subject :Re:WRT54G-EU.. 2012-02-23- 08:03:56 
WB9RIM
Member
Joined: 2012-02-08- 03:06:31
Posts: 5
Location: Evansville In

Hi Jim

  Thanks what should I be looking for in the serial number? As you may have guessed things on this side of the river are picking up there are about 1/2 dozen of us playing with nodes and have been doing some range testing. I have a node up at my house now and there is one up at the Red Cross and we have plans for more nodes as we get them built.

73 Danny WB9RIM
IP Logged
 Subject :Re:WRT54G-EU.. 2012-02-23- 08:33:39 
KC4BQK
Member
Joined: 2010-10-09- 10:20:10
Posts: 34
Location: Henderson KY
 
Danny Look here: http://hsmm-mesh.org/section-blog/37-hardware-faqs/101-supported-hardware.html then click the "Hardware guide to print" at the bottom of the page. On this side of the river we have a group also building and testing nodes. We are planning on deploying them in the spring for testing. We have also can use the mesh node to connect to the BPQ nodes for sending winlink email. We need to get together and work on this project together. 73 Jim KC4BQK
IP Logged
Page # 


Powered by ccBoard


SPONSORED AD: