Broadband-Hamnet™ Forum :: Firmware
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :Changed setting, now no DHCP.. 2012-03-23- 07:51:43 
N0PGH
Member
Joined: 2012-03-23- 09:41:33
Posts: 3
Location: De Soto, KS

Using a WRT54GL and WRT54G both with 0.4.2. Had two nodes N0PGH-TEST1 & N0PGH-TEST2 that saw and communicated with each other just fine. Laptop connected to each one.

I was exploring the software on N0PGH-TEST2 and in Setup changed the node type from Mesh Node to Mesh Access Point. I saved changes without thinking.

Now I cannot get an IP Address. I've tried resetting, 30-30-30 reset, etc. I've also tried manually setting laptop address to 172.27.0.5 and pinging the router at 172.27.0.1 with no luck either.

I can still connect via wireless to HSMM-MESH or N0PGH-TEST2 on this router but do not get an IP Address there either.

N0PGH-TEST1 is still working fine...

Any ideas???

Brian
IP Logged
Last Edited On: 2012-03-23- 08:15:12 By N0PGH for the Reason
 Subject :Re:Changed setting, now no DHCP.. 2012-03-23- 14:08:27 
N0PGH
Member
Joined: 2012-03-23- 09:41:33
Posts: 3
Location: De Soto, KS

Got it fixed now.

It seems when you change this setting, the IP Address changes to 172.27.0.2

I was able to login and change the setting back.

I need to do some more reading!!
IP Logged
Page # 


Powered by ccBoard


SPONSORED AD: