Broadband-Hamnet™ Forum :: Hardware
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :POE Standards for HSMM-MESH.. 2012-01-23- 02:33:23 
KV4I
Member
Joined: 2011-12-17- 08:30:12
Posts: 51
Location: New Smyrna Beach, FL

I'm preparing to add POE to my Mesh node so I looked at HSMM-MESH.org to learn what HSMM-MESH standards, if any, were in place for POE.


Please forgive me if this has already been covered. I could not find any information at HSMM-MESH.org regarding any POE standards. Are there any?


It seems to me that 802.3af mode B (using the spare wires for DC) might be appropriate since the WRT54Gx family seems to be limited to 100BaseT.


Thanks & 73,

Mark KV4I
IP Logged
Last Edited On: 2012-01-23- 03:17:37 By KV4I for the Reason fix typo.
 Subject :Re:POE Standards for HSMM-MESH.. 2012-01-25- 18:39:46 
Joined: 2024-11-22- 12:52:48
Posts: 0
Location: 
POE is an IEEE standard. It is outlined in 802.3af-2003 and 802.3at-2009. Long story short it uses the 2 unused data pairs to transmit power using a single cable.
IP Logged
 Subject :Re:POE Standards for HSMM-MESH.. 2012-01-26- 02:23:42 
KV4I
Member
Joined: 2011-12-17- 08:30:12
Posts: 51
Location: New Smyrna Beach, FL

Hi, inuyasha Yes, I understand that POE is described in 802.3af and from what I've read there are two modes, A and B. Mode A delivers power on the data pairs (Phantom power) and mode B delivers on the 2 unused pairs. I was wondering if there was an HSMM-MESH standard specifying either A or B. Thanks, Mark KV4I
IP Logged
Last Edited On: 2012-01-26- 04:01:33 By KV4I for the Reason typo
 Subject :Re:POE Standards for HSMM-MESH.. 2012-01-26- 11:36:57 
Joined: 2024-11-22- 12:52:48
Posts: 0
Location: 
I've never heard of it referenced as mode "A" or mode "B" but I would imagine that's limited to which mode your hardware supports. Most consumer hardware isn't compatible with POE but I simply sliced a power adapter onto the unused pairs in a cat5. Its not a "true to spec" POE implementation but it works, and all of my "tech savvy" friends know how to hook it up at first sight.
IP Logged
 Subject :Re:POE Standards for HSMM-MESH.. 2012-01-26- 12:53:57 
KV4I
Member
Joined: 2011-12-17- 08:30:12
Posts: 51
Location: New Smyrna Beach, FL

802.3af Standards A and B are described at http://en.wikipedia.org/wiki/Power_over_Ethernet


73 Mark KV4I
IP Logged
Last Edited On: 2012-01-26- 12:55:59 By KV4I for the Reason
 Subject :Re:POE Standards for HSMM-MESH.. 2012-01-26- 16:03:52 
Joined: 2024-11-22- 12:52:48
Posts: 0
Location: 
5+ years of computer repair and networking and im still learning new things. Thanks.
IP Logged
 Subject :Re:POE Standards for HSMM-MESH.. 2012-01-27- 12:59:03 
KV4I
Member
Joined: 2011-12-17- 08:30:12
Posts: 51
Location: New Smyrna Beach, FL
I earned my first MCSE in 1999 and I'm still learning new things. That's the nature (and for me, half the fun) of technology. There's always something new to learn.
IP Logged
 Subject :Re:POE Standards for HSMM-MESH.. 2012-02-28- 16:48:48 
W5LMM
Member
Joined: 2012-02-13- 18:18:04
Posts: 126
Location: Albuquerque, NM
 
TIA568B is the common standard used everywhere. I have yet to see anyone using TIA 568A in 25 years of IT. So your blue and brown pairs.
IP Logged
Page # 


Powered by ccBoard


SPONSORED AD: