I am trying to build a VOIP setup with a raspberry pi for a Field Day demo of hamlet but have ran into a small problem. The Cisco IP phones I got donated to me are the 7961 & 7962 models and all of the videos I have found are for the 7941 phones. Is there any VOIP guru's out there that can help me out? I have all of the flew needed but cannot seem to figure out how where in the config to tell the phone to look at the RPI as the TFTP server in the phones config file. I have the phone set to look for the TFTP servers ip address but can't get the phones to register with the server. |