|
Hi, I have use NS M2 which is integrated with local AmprNET gateway which have 2 ethernet cards one to internet connected and second to NS M2 main gateway local Mesh Node to get access all nodes to wide AmprNet network. My local nodes use subnet 44.165.33.128 /255.255.255.128 Amprnet gateway on eth1 computer has 44.165.33.1 Ip with connected to NS M2 with LAN IP 44.165.33.2 (255.255.255.252) nad WIFI 44.165.33.254
On NS M2 I have made manually changes via SSH in following:
cd /usr/local/bin
vi olsrd-config
= add suffix ampr.org ===============
push @file, qq( PLParam "suffix" ".ampr.org"\n);
push @file, qq( PLParam "dns-server" ""\n);
push @file, qq( PlParam "timeout" "300"\n);
===================
cd /www/cgi-bin/
vi status
======== add suffix ampr,org c===============
if($config eq "mesh")
{
print " ";
print "<button type=button onClick='window.location=\"mesh\"' title='See what is on the mesh'>Mesh Status</button>\n";
print " ";
print "<button type=button onClick='window.location=\"http://$node.ampr.org:1978/\"' title='See the OLSR routing details'";
=============================
cd /etc/config/
vi network
======change LAN IP to Ampr Net and add LAN gateway to AmprNet===========
config interface loopback
option ifname "lo"
option proto static
option ipaddr 127.0.0.1
option netmask 255.0.0.0
#### LAN configuration
config interface lan
option ifname "eth0"
option proto static
option ipaddr 44.165.33.2
option netmask 255.255.255.252
option dns "44.165.33.1 "
option gateway 44.165.33.1
#### WAN configuration
config interface wan
option ifname "eth0.1"
option proto disabled
option ipaddr
option netmask
option gateway
#### WIFI configuration
config interface wifi
option ifname "wlan0"
option proto static
option ipaddr 44.165.33.1
option netmask 255.255.255.128
#### device to device configuration
config interface dtdlink
option ifname "eth0.2"
option proto disable
option ipaddr 10.7.57.177
option netmask 255.0.0.0
config interface wifi_mon
option proto none
========================
vi olsrd
=========add HNA info about 44/8 network ====== #### Loopback configuration
config olsrd
# uncomment the following line to use a custom config file instead:
#option config_file '/etc/olsrd.conf'
option IpVersion '4'
#option MainIp '44.165.33.1'
option RtTable '30'
option RtTableDefault '31'
option LinkQualityAlgorithm 'etx_ffeth'
config LoadPlugin
option library 'olsrd_arprefresh.so.0.1'
config LoadPlugin
option library 'olsrd_httpinfo.so.0.1'
option port '1978'
list Net '0.0.0.0 0.0.0.0'
option Resolve 'true'
config LoadPlugin
option library 'olsrd_txtinfo.so.0.1'
option accept '0.0.0.0'
#config LoadPlugin
# option library 'olsrd_secure.so.0.6'
# option keyfile '/etc/olsrd.d/olsrd_secure_key'
config LoadPlugin
option library 'olsrd_dot_draw.so.0.3'
option accept '127.0.0.1'
option port '2003'
config LoadPlugin
option library 'olsrd_watchdog.so.0.1'
option file '/tmp/olsrd.watchdog'
option interval '5'
config Interface
list interface 'wifi'
config Hna4
option netaddr 44.0.0.0
option netmask 255.0.0.0
============================================
cd /etc/init.d
vi nntpclient
========ad local NTP server link =================
#!/bin/sh /etc/rc.common
START=70
start() {
{
while ! ping -c1 44.165.33.1 >/dev/null 2>&1; do sleep 60; done
/usr/sbin/ntpclient -s -l -h 44.165.33.1 >/dev/null 2>&1;
} &
}
stop() {
killall ntpclient
}
========================
After this changes my NS M2 working as local Mesh Node gateway to AmprNet and I can use SETUP via web interface
because it will be overwrite my manually changes. I have switch off firewall and DHCP on LAN because my local network is
only part of AmprNet network and we don't have access from 44/8 to -> aaal only 44net<->44net
73 Waldek SP2ONG
|
