Broadband-Hamnet™ Forum :: Applications
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :mIRCD Server.. 2015-05-31- 21:20:20 
g6lvs
Member
Joined: 2014-11-12- 09:15:36
Posts: 4
Location: 

I have installed the mIRCD server on my lap top.and I have made it available on my meshnode

(Linksys WRT54GL) it now shows up on the mesh as an advertised service however when you click on it from another node the following message appears;http://g6lvs-ventnor:6667/ seems to be unavailable not allowed to use restricted network port. The g6lvs-ventnor bit is the mesh node which is connected with my laptophosting the mIRC server. THe internet service works OK. Have I done something wrong or not done something I shoul have.

G6LVS
IP Logged
 Subject :Re:mIRCD Server.. 2015-06-03- 10:40:55 
KE8AVJ
Member
Joined: 2015-04-08- 12:09:35
Posts: 30
Location: Saginaw, MI USA
Do you have this port forwarded to your laptop?
IP Logged
4 nodes. One GL, one Bullet, one AirGrid and one Raspberry Pi node. RasPBX and web server setup on another Raspberry Pi.

Club page: www.k8dac.com
 Subject :Re:mIRCD Server.. 2015-06-08- 20:57:37 
g6lvs
Member
Joined: 2014-11-12- 09:15:36
Posts: 4
Location: 
On the Port Forwarding page On WAN interface 6667 is on outside port and LAN port with a an Address of 10.126.1.5 Which was offered by the Node.On the ADvertised Services I have entered NAME irc ticked the Link Box Url http:// G6LVS-Ventnor:6667
IP Logged
Page # 


Powered by ccBoard


SPONSORED AD: