Broadband-Hamnet™ Forum :: Applications
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :Installing packages and port forwarding.. 2013-06-12- 04:06:36 
wc3xs
Member
Joined: 2013-06-06- 22:25:20
Posts: 13
Location: 

I have installed the tftp-hpa package and it works. However, if I enable the DMZ host in port forwarding, I can no longer access tftp from my workstation. 

What configuration keeps services like port 8080 and 2222, etc. bound to the mesh gateway and allows others to pass to the DMZ host?

Thanks in advance,

Jesse - WC3XS
IP Logged
 Subject :Re:Installing packages and port forwarding.. 2013-06-12- 08:07:47 
K5KTF
Admin
Joined: 2010-01-18- 23:04:04
Posts: 266
Location: 5' from this webserver
  

There are TWO ways for DMZ: NAT mode with a host IP in DMZ, and 1/5/13 DMZ-Host mode.

For NAT mode, If you have a host IP in the DMZ, it works like this :

If you add port forwarding to other machines on the LAN, those take priority over the DMZ.

Anything coming in, if there is a port-map for that port, that will take place;

If there is no port mapping (aka all other traffic), then it gets sent to the DMZ host.


Does that help?

KTF
IP Logged
Last Edited On: 2013-06-12- 08:08:06 By K5KTF for the Reason
B-) Jim K5KTF EM10bm Cedar Park, TX :star:
 Subject :Re:Installing packages and port forwarding.. 2013-07-07- 06:51:11 
wc3xs
Member
Joined: 2013-06-06- 22:25:20
Posts: 13
Location: 
Actually, my situation was for a tftp server installed on the mesh ap. I want that service to stay local to the ap. When I configured a DMZ IP, the tftp port was forwarded to the DMZ host.
IP Logged
Page # 


Powered by ccBoard


SPONSORED AD: