|
Greeting, I have numerous wrt54g routers that I did K5KTF's USB mod on; they all performed flawlessly in version 1 then I upgraded to release version 3.1.
I have followed the same steps of getting the USB sticks recognized then moved the OS over to the sticks using K5KTF's instructions on this board at http://www.broadband-hamnet.org/applications-for-the-mesh/116-move-os-to-usb-storage.html everything seems to work accept name resolution. I can access the node and other mesh nodes using IP, but not by node names when ethernet connected to the node with the OS moved to usb. I can however access the node with os on usb from other nodes using it's name and even go through it to other mesh nodes by name when I have accessed the questionable node from another node. I have looked all over for differences but can't seem to find what the problem is. Any help would be greatly appreciated.
I created the following file /etc/init.d/mountusb and it's startup in /etc/rc.d
#!/bin/sh /etc/rc.common
EXTERNAL_PARTITION=/dev/scsi/host0/bus0/target0/lun0/part2
START=41
start () {
echo "loading USB and ext2 modules"
for module in usbcore usb-ohci uhci ehci-hcd scsi_mod sd_mod usb-storage jbd ext2; do
insmod $module
done
sleep 2s
[ "$FAILSAFE" != "true" ] && [ -b $EXTERNAL_PARTITION ] && {
mount $EXTERNAL_PARTITION /mnt/root
[ -x /mnt/root/sbin/init ] && {
mount -o move /proc /mnt/root/proc && \
pivot_root /mnt/root /mnt/root/mnt/openwrt && {
mount -o move /mnt/openwrt/dev /dev
mount -o move /mnt/openwrt/tmp /tmp
swapon /dev/scsi/host0/bus0/target0/lun0/part1
}
}
}
}
-----------------------------------------------------
Also here is the results of the CLI 'mount' command
root@AF7EF-2:/etc/rc.d# mount
rootfs on / type rootfs (rw)
/dev/root on /mnt/openwrt/rom type squashfs (ro)
none on /dev type devfs (rw)
none on /proc type proc (rw)
none on /tmp type tmpfs (rw,nosuid,nodev)
none on /dev/pts type devpts (rw)
/dev/mtdblock/4 on /mnt/openwrt/jffs type jffs2 (rw)
mini_fo:/jffs on /mnt/openwrt type mini_fo (rw)
none on /proc/bus/usb type usbfs (rw)
/dev/scsi/host0/bus0/target0/lun0/part2 on / type ext2 (rw)
-------end
Thanks in advance
73
Dan ~ AF7EF |
