Broadband-Hamnet™ Forum :: Problems & Answers
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :Port Forwarding in 1.0.0.. 2013-08-06- 05:12:05 
KM2O
Member
Joined: 2012-09-22- 11:04:45
Posts: 25
Location: Albany NY

I have begun re-flashing nodes to 1.0.0.  So far so good using the download via the setup administration route.  The problem comes in port forwarding for devices and services.  My first example is in making an IP camera available.

In the last version all was well with the following in Port Forwarding:

Interface: WiFi  

Type: TCP

Lan IP: 172.27.0.5

LAN Port: 80

The link was then advertised and clickable across the MESH.

Now the same screen in 1.0.0 does not allow anything but WAN for an Interface.  I understand the LAN IP's have now changed to 10.67.184.xx. The camera is in the LAN IP with 10.67.184.93 and has been reserved.

Nothing seems to work.

Suggestions?

Thanks

Dave KM2O
IP Logged
 Subject :Re:Port Forwarding in 1.0.0.. 2013-08-07- 16:39:49 
AD5OO
Admin
Joined: 2010-01-18- 23:05:42
Posts: 37
Location: 

This is described on the help page.  If the description is not adequate please let us know.
IP Logged
 Subject :Re:Port Forwarding in 1.0.0.. 2013-08-08- 10:05:36 
IZ5FSA
Member
Joined: 2013-02-23- 03:47:38
Posts: 13
Location: JN53OS
Hi to all. This is my first experience with HSMM-MESH... I've setted up 2 wrt54gl v1.1 with latest firmware this evening (here in Italy) and called IZ5FSA-001 (it acts like a mesh-node with LAN in my home lan) and IZ5FSA-002 (it also acts as a mesh-node but providing its own lan with dhcp). I've setted up port forwarding on IZ5FSA-001 to reach UI-webserver on 192.168.1.10:88 as a service, but if I can see this service active on IZ5FSA-001 node from IZ5FSA-002 mesh status page, the service is unreachable from the lan behind IZ5FSA-002. I cannot attach the screenshot of my IZ5FSA-001 configuration... but sniffing ethernet packets on 192.168.1.10 (ui-webserver) it seems that only "kerberos" packets arrived from IZ5FSA-002 lan to the IZ5FSA-001 lan through the mesh! I hope I have explained... clearly!! Please help. 73 de Leo IZ5FSA
IP Logged

73 de Leo IZ5FSA
 Subject :Port Forwarding in 1.0.0.. 2013-08-08- 12:20:08 
wx5u
Member
Joined: 2013-01-02- 00:30:45
Posts: 188
Location: Austin, TX

What device is running UI-webserver?  Is this device plugged into a non-mesh home router?

Does the WAN port of IZ5FSA-001 plug into the LAN port on your home router?  

Is the "mesh gateway" box checked on the setup page of IZ5FSA-001?



[IZ5FSA 2013-08-08- 10:05:36]:

Hi to all. This is my first experience with HSMM-MESH... I've setted up 2 wrt54gl v1.1 with latest firmware this evening (here in Italy) and called IZ5FSA-001 (it acts like a mesh-node with LAN in my home lan) and IZ5FSA-002 (it also acts as a mesh-node but providing its own lan with dhcp). I've setted up port forwarding on IZ5FSA-001 to reach UI-webserver on 192.168.1.10:88 as a service, but if I can see this service active on IZ5FSA-001 node from IZ5FSA-002 mesh status page, the service is unreachable from the lan behind IZ5FSA-002. I cannot attach the screenshot of my IZ5FSA-001 configuration... but sniffing ethernet packets on 192.168.1.10 (ui-webserver) it seems that only "kerberos" packets arrived from IZ5FSA-002 lan to the IZ5FSA-001 lan through the mesh! I hope I have explained... clearly!! Please help. 73 de Leo IZ5FSA
IP Logged
I'm not part of the development team, so take what I say with a grain of salt. I'm also easily confused.

Check out the free Wireless Networking Book
 Subject :Re:Port Forwarding in 1.0.0.. 2013-08-08- 19:07:46 
IZ5FSA
Member
Joined: 2013-02-23- 03:47:38
Posts: 13
Location: JN53OS

What device is running UI-webserver?

A PC into my home LAN called 192.168.1.10


Is this device plugged into a non-mesh home router?

Yes, it is.


Does the WAN port of IZ5FSA-001 plug into the LAN port on your home router?

NO! LAN port of IZ5FSA-001 plug into the LAN port of my home router with static IP and no gateway assigned.


Is the "mesh gateway" box checked on the setup page of IZ5FSA-001?

NO!!! That's the real "Columbus Egg"!!! Money mouth


Checked the mesh gateway box and rebooted... and my home UI-webserver works fine behind IZ5FSA-002 mesh node!!!!!!


You can see attachments for final configuration: it will help someone in the future!


Next step will be to find a new WRT54GL and act it as a mesh AP... and figure out how it works!


Many, many thanx WX5U


--

73 de Leo IZ5FSA



Attachments
 mesh4.png [250 KB] :: final result - it works!
 mesh3.png [7 KB] :: IZ5FSA-002 mesh status
 mesh2.png [13 KB] :: IZ5FSA-001 port routing config
 mesh1.png [20 KB] :: IZ5FSA-001 basic config
IP Logged
Last Edited On: 2013-08-09- 19:37:56 By IZ5FSA for the Reason

73 de Leo IZ5FSA
 Subject :Re:Port Forwarding in 1.0.0.. 2013-08-09- 09:09:56 
wx5u
Member
Joined: 2013-01-02- 00:30:45
Posts: 188
Location: Austin, TX

It took me a while to wrap my mind around what you're doing there.   That's an interesting configuration, but it does make sense after I think about it for a while.

I'm a little surprised the mesh gateway box fixed your problem. 

Glad you got it working.

IP Logged
I'm not part of the development team, so take what I say with a grain of salt. I'm also easily confused.

Check out the free Wireless Networking Book
Page # 


Powered by ccBoard


SPONSORED AD: