Error
  • DB function failed with error number 1194
    Table 'jos_session' is marked as crashed and should be repaired SQL=SELECT guest, usertype, client_id FROM jos_session WHERE client_id = 0
 Broadband-Hamnet™ Forum :: Problems & Answers
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :WiFi AP works (internet) but no localnode access.. 2012-10-11- 04:10:05 
KC7NEC
Member
Joined: 2012-02-07- 11:50:40
Posts: 17
Location: 

I have a v7 wrt54g connected to my mesh node. This is allowing me to access the mesh via standard WiFI connection. I am able to bring up internet this way no problem.


In the past with the same set up I was able to pull up the localnode and meshh status pages the same way. I no longer can bring up the localnode on my WiFi connected device. Is this a change in the new firmware? if so it ruins 98% of what we planned to use the mesh for. Is there a workaround? any suggestions?
IP Logged
 Subject :Re:WiFi AP works (internet) but no localnode access.. 2012-10-12- 04:44:36 
KU7PDX
Member
Joined: 2012-08-02- 10:31:35
Posts: 18
Location: Hillsboro, Oregon, USA
 

Can you describe your configuration? It sounds like something like this:

AP ----- MESHNODE(gateway) ----- Internet

or is it more like

AP ----- MESHNODE <<<<<     >>>>> MESHNODE(gateway) ----- Internet

I did something similar to the second arrangement on Wednesday and had no issues going to http://localnode:8080/ as well as internet sites.

Are you able to go to the localnode page when directly plugged in or if the internet connection isn't plugged into the router?
IP Logged
73,
Chris Arnesen, KU7PDX
 Subject :Re:WiFi AP works (internet) but no localnode access.. 2012-10-14- 16:05:13 
KY9K
Member
Joined: 2012-07-07- 23:39:07
Posts: 23
Location: Roy, WA
Additional to the questions from Chris... 1) Are you using the WRT54Gv7 as a dump AP and plugging between the LAN ports of the v7 and the mesh node, or are you using the v7 as a NAT/router and plugging the WAN port of the v7 into the LAN ports of the mesh node? 2) What are you using for DNS servers on your wifi connected host/device? If you're using something other than the mesh node as your DNS server, the "localnode" name isn't going to work. Have you tried http://172.27.0.1:8080 ? If that works and "localnode..." doesn't, then you've likely got a DNS issue to resolve. If neither method works then you've probably got a layer-3 network issue to resolve. -KY9K/Brian
IP Logged
Page # 


Powered by ccBoard


SPONSORED AD: