Device is WRT54G v3.1

Firmware  is Broadband-Hamnet v1.0

I installed the firmware without any issues and had to mesh nodes working fine. Then I had to start experimenting so I installed the IRC server package and that went well.  Then I configured the port forwarding. I wasn’t able to connect to the IRC server with a client so I went back into the settings to check my work and I must have changed something. Now I don’t get any DHCP from the node when I plug into the lan port.  It’s not broadcasting the SSID of BrodbandHamnet-v1 anymore its sending AG6AU-1. I can’t connect to it from the other mesh node. I tried plugging the lan port of the broken node into the lan port of the working node and tried to connect to http://172.27.0.2:8080/ and got no response. I am able to plug into the lan port of the broken node and connect to the shell at 192.168.1.1. Is there any way I can check the settings from the shell or reload the firmware from the shell? I would really like to fix the node and figure out what I did wrong.

Thanks,

Jay- KE6GLA