Broadband-Hamnet™ Forum :: Problems & Answers
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :Newbie - problems with Linksys WRL54GL.. 2014-01-16- 08:48:27 
SM6SMY
Member
Joined: 2013-12-30- 11:51:52
Posts: 6
Location: 

Hello friends,

I just installed bbhn-1.0.0 in my 3 Linksys WRL54GL.

2 of these had the Linksys software - And it works without problems.

The 3rd had the Tomato firmware before installing bbhn-1.0.0.

I do not know if it matters ..
But after Installation of bbhn-1.0.0 There was no problems setting upp the nod wth my callsign.
But after reboot, so I reach not http://localnode:8080/.

Running ipconfig /relase and ipconfig / renew gives me a new ip: 172.27.0.54 - Looks fine.
Yes, I can ping the ip and it will resoponde the ping.

What more? 

On a working WRT54GL the "Power" and "WLAN" diods lights

On my faulty WRT54GL: only "Power" diod lights

Any good ideas on how I awake the sleeping WRT54GL?

 

Best 73 de

Per-Olof SM6SMY

 
IP Logged
Last Edited On: 2014-01-16- 09:28:07 By SM6SMY for the Reason
 Subject :Re:Newbie - problems with Linksys WRL54GL.. 2014-01-16- 17:14:25 
SM6SMY
Member
Joined: 2013-12-30- 11:51:52
Posts: 6
Location: 
Any idea?? I have read on the internet and the router does not seem to be "bicked". But what do I do next?? Best 73 de Per-Olof SM6SMY
IP Logged
 Subject :Newbie - problems with Linksys WRL54GL.. 2014-01-19- 07:45:04 
wx5u
Member
Joined: 2013-01-02- 00:30:45
Posts: 188
Location: Austin, TX

Sometimes Windows will just never get the configuration right, no matter what commands you type.

Try unplugging and replugging the ethernet connector.  Then shutdown (not just reboot) and power the PC back on.

IP Logged
I'm not part of the development team, so take what I say with a grain of salt. I'm also easily confused.

Check out the free Wireless Networking Book
 Subject :Re:Newbie - problems with Linksys WRL54GL.. 2014-01-22- 03:28:52 
SM6SMY
Member
Joined: 2013-12-30- 11:51:52
Posts: 6
Location: 

Both I and WTR54GL needed a night's sleep .. After this I could log in, but OLSR did not boot up. After a lot of restarts .. woke up and it works now. Now the next challenge. I want to be able to login via SSH. I have used SSH to my Raspberry Pi (Putty), but I do not reach the WRT54. I saw on a website that I first have to connect via Telnet and create a password - but I did not manage to connect via telnet either. Local Node:8080 works great. 73 Peo SM6SMY
IP Logged
Last Edited On: 2014-01-22- 03:32:12 By SM6SMY for the Reason
 Subject :Re:Newbie - problems with Linksys WRL54GL.. 2014-01-23- 08:46:51 
SM7I
Member
Joined: 2012-04-30- 14:56:55
Posts: 79
Location: JO65mo
 
Try ssh using port 2222
IP Logged
IT infrastructure and security professional
 Subject :Re:Newbie - problems with Linksys WRL54GL.. 2014-01-23- 08:49:13 
SM7I
Member
Joined: 2012-04-30- 14:56:55
Posts: 79
Location: JO65mo
 
Do you have any connection to the Chalmers guys that are connected down to us in SM7 using GRE tunneling ? You really should check the swedish section !
IP Logged
IT infrastructure and security professional
Page # 


Powered by ccBoard


SPONSORED AD: