Broadband-Hamnet™ Forum :: UBNT Firmware
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :bricked nanostation recovery? solved.. 2014-04-21- 11:53:31 
K3MMB
Member
Joined: 2014-03-16- 19:00:57
Posts: 71
Location: 

I managed to screw up a working nanostation and need a backdoor to reset it to a node. I fat figured it into MAP, hit reboot and now it makes a pretty good paper weight.

NS powered up, poe connected, lan connected tp lan port of another (functioning) node ... nothing happens. I do not see a wifi ap ssid.

Reset button does not function, no IP show on connected node.


have I just wasted 90 bucks??

73 de mike
IP Logged
Last Edited On: 2014-04-21- 13:12:41 By K3MMB for the Reason
 Subject :Re:bricked nanostation recovery?.. 2014-04-21- 12:03:50 
KG6JEI
Member
Joined: 2013-12-02- 19:52:05
Posts: 516
Location: 

Doubtful,

I just posted to your other thread but I will put the relevant detail here for FIRMWARE RECOVERY MODE (see the other thread for soft reset details)

It is actually VERY hard to brick a Ubiquiti device (not impossible, but hard).... If you have disabled the reset button, or the reset button doesn't work you can download the Ubiquiti firmware from the Ubiquiti website www.ubnt.com/download and perform a TFTP re-flash of the unit by following the firmware recovery procedure.

http://wiki.ubnt.com/Firmware_Recovery
IP Logged
Note: Most posts submitted from iPhone
Page # 


Powered by ccBoard


SPONSORED AD: