Broadband-Hamnet™ Forum :: Problems & Answers
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :Getting Started.. 2014-04-22- 04:13:43 
W6TPA
Member
Joined: 2014-04-21- 17:42:45
Posts: 3
Location: 

I'm just getting started and need help. I have loaded the mesh firmware on my wrt54gs v1.1. It shows  up as broadbandhamnet-v1 on my wifi list under devices (mac os x mavericks). If I select it and try http://localnode:8080/ I get 'no network'. Help?


Thanks,

Tom

W6TPA
IP Logged
 Subject :Re:Getting Started.. 2014-04-22- 04:43:50 
W6TPA
Member
Joined: 2014-04-21- 17:42:45
Posts: 3
Location: 
I sort of answered my own question. I turned wifi off and used a cable, and can now get http://localnode:8080/cgi-bin/status to work. However, when I try setup, it asks for name and password. I don't know if I changed it or what but I don't know the name and password Is there a way to reset?? I tried the button but still have the same problem. Ideas? Tom
IP Logged
 Subject :Getting Started.. 2014-04-22- 08:11:26 
wx5u
Member
Joined: 2013-01-02- 00:30:45
Posts: 188
Location: Austin, TX

Resetting password:


Failsafe mode:

http://www.broadband-hamnet.org/documentation/71-using-safe-mode-to-reset-a-forgotten-password.html


Reinstall firmware using tftp - scroll down to "installing firmware with tftp."

http://www.broadband-hamnet.org/documentation/68-firmware-installation-instructions.html
IP Logged
Last Edited On: 2014-04-22- 08:19:14 By wx5u for the Reason
I'm not part of the development team, so take what I say with a grain of salt. I'm also easily confused.

Check out the free Wireless Networking Book
 Subject :Re:Getting Started.. 2014-04-22- 14:10:03 
W6TPA
Member
Joined: 2014-04-21- 17:42:45
Posts: 3
Location: 
Thanks! That worked. Unfortunately, now I can't connect to the router anymore (with localnode:8080). I've tried with wifi off and with wifi on BroadbandHamnet-v1. I get no network from the browser. Suggestions? Thanks, Tom
IP Logged
 Subject :Re:Getting Started.. 2014-04-22- 19:52:10 
KF5JIM
Future Astronaut
Joined: 2013-07-17- 12:13:36
Posts: 250
Location: Nederland
Use an Ethernet cable and restart your computer and router
IP Logged
My opinions and views expressed here are solely my own.
Page # 


Powered by ccBoard


SPONSORED AD: