Just for grins, I flashed a picoststaionM2.

after the flash completed, the unit rebooted with an IP of 192.168.1.1.  WEB access did not work. Played with it for a while then connected it to a router setup with the router address as 192.168.1.3.

Connected via a browser to 192.168.1.1:8080, basic step up page came up. Set my callsign and password, saved and reboot.

The PSM2 came up joined the mesh. You can access it via the mesh status page of other nodes. What it has trouble with is assigning an IP address to anything plugged into the LAN port of the POE. I tried connecting a simple switch, still no joy on getting IP assigned.

It does say in big bold letters: UNTESTED .... but is close..

73 de mike 

Just tinkering with the PSM2 (not HP model). I set it up as MAP, laptops can see it and connect with not problem. Linux laptops resolve node names but windows laptops do not. I know it has something to do with DNS on windows, but not how to fix it. The node acting as interface to PSM2 is set to direct 5.

I added local.mesh to the DSN list on the wireless adaptor, but no workie. I can access nodes via the IP address.

73 de mike