Broadband-Hamnet™ Forum :: VoIP
Welcome Guest   [Register]  [Login]
 Subject :Nortel 1535.. 2015-06-08- 22:08:33 
N8JJ
Member
Joined: 2014-07-23- 14:46:49
Posts: 15
Location: Beavercreek, Ohio

Has anyone used on of these on the mesh?  You can pick them up on EBAY for about $30.

I am trying to set it up serverless, but it insists on registering.

It accepts direct IP calls but won't dial one without registering.

I was able to telnet into the box and have the password for the root, but haven't found a way to bypass the register.

Any suggestions?

JJ


IP Logged
 Subject :Re:Nortel 1535.. 2015-06-09- 03:42:58 
KE8AVJ
Member
Joined: 2015-04-08- 12:09:35
Posts: 30
Location: Saginaw, MI USA

Hi,

What are you using to call the nortel phone?

IP Logged
4 nodes. One GL, one Bullet, one AirGrid and one Raspberry Pi node. RasPBX and web server setup on another Raspberry Pi.

Club page: www.k8dac.com
 Subject :Re:Nortel 1535.. 2015-06-09- 07:34:13 
N8JJ
Member
Joined: 2014-07-23- 14:46:49
Posts: 15
Location: Beavercreek, Ohio
I can call it from a Basictalk OK, but it won't dial an IP without registering.
IP Logged
 Subject :Re:Nortel 1535.. 2015-06-09- 13:15:40 
KE8AVJ
Member
Joined: 2015-04-08- 12:09:35
Posts: 30
Location: Saginaw, MI USA

I found this manual:

https://downloads.avaya.com/css/P8/documents/100100089

on page 28-29 it talks about the user info. Not sure if this will help or not, but try removing all user info it mentions. It sounds like if anything is entered here it will try to register but I don't have one these to test that assumption. I would think that because you can call the nortel it should be possible to call with it, even if it is not registered. Hope this helps.

Good Luck


IP Logged
Last Edited On: 2015-06-09- 13:20:57 By KE8AVJ for the Reason typo
4 nodes. One GL, one Bullet, one AirGrid and one Raspberry Pi node. RasPBX and web server setup on another Raspberry Pi.

Club page: www.k8dac.com
 Subject :Re:Nortel 1535.. 2015-06-15- 23:32:06 
N8JJ
Member
Joined: 2014-07-23- 14:46:49
Posts: 15
Location: Beavercreek, Ohio
I insatalled a R-Pi PBX (incredible PBX) and got it to work! We made a video call across the mesh using two Nortels. Now we need to refine it.
IP Logged
Page # 


Powered by ccBoard


SPONSORED AD: