Broadband-Hamnet™ Forum :: Northeast OH
Welcome Guest   [Register]  [Login]
 Subject :Ubiquity bullet firmware flash.. 2014-09-23- 13:35:40 
N8LXY
Member
Joined: 2014-07-17- 13:59:00
Posts: 4
Location

I have been trying to load the .bin file from BBHN site into my new bullet and keep getting an error. I can get to AirOS, select administration page select to upgrade and select the file up upload to the bullet but with 5 to 10 seconds I get a failure notice. Does anyone have any ideas what is happening? I will get screen shots when I get back home Friday evening. Thank you for your efforts. Bill

IP Logged
 Subject :Re:Ubiquity bullet firmware flash.. 2014-09-23- 14:11:03 
AE5CA
Member
Joined: 2012-05-19- 21:52:33
Posts: 81
Location

Two items come to mind.

One:

is this a BulletM2HP or an earlier model?  The prior models do not have enough memory to load BBHN and are not supported. 


Two:

Are you using the bullet "factory" .bin file or the "sysupgrade" .bin file?  For a new Bullet with AirOS on it you need the "factory" .bin file. The "sysupgrade" is for devices that have been previously flashed. 

Clint, AE5CA

IP Logged
 Subject :Re:Ubiquity bullet firmware flash.. 2014-09-23- 15:13:04 
N8LXY
Member
Joined: 2014-07-17- 13:59:00
Posts: 4
Location
This is a Bullet M2HP unit purchased in the last 4 weeks. I am using the "factory" bin file.
IP Logged
 Subject :Re:Ubiquity bullet firmware flash.. 2014-09-23- 15:16:11 
KG6JEI
Member
Joined: 2013-12-02- 19:52:05
Posts: 516
Location

See:

http://ubnt.hsmm-mesh.org/products/BBHN/wiki/HowTo/FlashUbiquiti

Most common error I've seen is using the config import box instead of the firmware import box.  The error text would go a long way rather than everyone guessing.

IP Logged
Note: Most posts submitted from iPhone
Page # 


Powered by ccBoard


SPONSORED AD: