Error
  • Request Forbidden
 Broadband-Hamnet™ Forum :: General
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :OLSR status page not working.. 2013-12-08- 18:50:12 
K7DAI
Member
Joined: 2012-05-31- 16:34:26
Posts: 3
Location: Portland, Oregon
 

When I click the OLSR status page from my node, I get redirected to port :1978 and the page is not found. I just get the browser page showing not found.

Any thoughts?

I'm on v1.0.0 of the firmware
IP Logged
 Subject :Re:OLSR status page not working.. 2013-12-08- 19:09:02 
KF5JIM
Future Astronaut
Joined: 2013-07-17- 12:13:36
Posts: 250
Location: Nederland

You could very well be trying to access OLSR over the WAN. Plugging your computer into the LAN on the node and go to http://localnode:1978/. This has happened to me when you have the node plugged into your home network and you are trying to access it over your home router.  If going through the WAN, you might also have to type in the router-assigned ip address (eg. http://192.168.1.74:1978/).
IP Logged
Last Edited On: 2013-12-08- 19:11:39 By KF5JIM for the Reason
My opinions and views expressed here are solely my own.
 Subject :Re:OLSR status page not working.. 2013-12-09- 03:27:45 
K7DAI
Member
Joined: 2012-05-31- 16:34:26
Posts: 3
Location: Portland, Oregon
 
I did suspect that, as I am trying over the WAN. I dont have a LAN cable connected as it is a remote node. I have tried the router assigned IP address http://192.168.2.181:1978 with no luck. I will try using localhost via the Windows Hosts file tonight.
IP Logged
 Subject :Re:OLSR status page not working.. 2013-12-09- 03:48:10 
KF5JIM
Future Astronaut
Joined: 2013-07-17- 12:13:36
Posts: 250
Location: Nederland

Then that would be the issue. Port 1978 is not open to the WAN on the node; ergo, no connection.
IP Logged
My opinions and views expressed here are solely my own.
 Subject :Re:OLSR status page not working.. 2013-12-09- 17:18:37 
K7DAI
Member
Joined: 2012-05-31- 16:34:26
Posts: 3
Location: Portland, Oregon
 
Gocha. thats too bad, I dont have any practical way to connect to the LAN side
IP Logged
 Subject :Re:OLSR status page not working.. 2013-12-10- 03:41:18 
sp2ong
Member
Joined: 2013-10-30- 10:57:25
Posts: 72
Location: 

Hi, I have confirm problem with connect to OLSR status when I have WRT54 Mesh Node I have connected via WAN to my local network. I can see and change on ip_address_WAN:8080 but when I have try IP_address_WAN:1978 I hav not success. But if my latop connect direct to WRT54 in LAN and I have address on latop form dhcp server WRT54 like 10.244.51.117 I can see OLSR status use http://10.244.51.117:1978. It is look like problem in firewall definition on WRT54 where it is not allow connect to 1978 port via WAN?
IP Logged
Last Edited On: 2013-12-10- 03:41:50 By sp2ong for the Reason
 Subject :Re:OLSR status page not working.. 2013-12-10- 03:52:28 
sp2ong
Member
Joined: 2013-10-30- 10:57:25
Posts: 72
Location: 
Hi, Ok I have add in /etc/config/firewall (it maybe better in /etc/firewall.user) one line accept:wan:dport=1978 prot=tcp no I can see OLSR status via WAN from my local network. But it myeb it is not secure and better use src IP address which allow connect to 1978 port via WAN. 73 Waldek
IP Logged
 Subject :Re:OLSR status page not working.. 2013-12-10- 05:15:11 
KF5JIM
Future Astronaut
Joined: 2013-07-17- 12:13:36
Posts: 250
Location: Nederland

I would also recommend adding that line to the /etc/config.mesh/firewall file so it can be preserved across configuration changes.
IP Logged
My opinions and views expressed here are solely my own.
 Subject :Re:OLSR status page not working.. 2013-12-10- 05:59:42 
sp2ong
Member
Joined: 2013-10-30- 10:57:25
Posts: 72
Location: 
Ok I have put in /etc/config.mesh/firewall instead /etc/config/firewall but after reboot I can not connect to http://ip_address_WAN:1978
IP Logged
 Subject :Re:Re:OLSR status page not working.. 2013-12-10- 06:13:48 
sp2ong
Member
Joined: 2013-10-30- 10:57:25
Posts: 72
Location: 

Ok if we put in /etc/config.mesh/firewall this rule via  shell after this we must go to http://ip_address:8080 select "setup" and use "Save changes" and reboot. Because save changes from web interface copy file "firewall" from /etc/config.mesh/firewall to /etc/firewall. After this we can connect OLSR status use WAN IP address



[sp2ong 2013-12-10- 05:59:42]:

Ok I have put in /etc/config.mesh/firewall instead /etc/config/firewall but after reboot I can not connect to http://ip_address_WAN:1978
IP Logged
Page # 


Powered by ccBoard


SPONSORED AD: