Hello Anthony, I was just wondering how the talk went? I just joined the list here the other day so I missed it sad to say. Here in Toronto I have a node all set up and boxed ready to go up when the wx improves. I intend to try voip among other things and there are a few others who are going to try as well to do something. This project has a bit of potential I think, we just need to get more upgraded routers in the right hands and let natural Ham curiosity take over HI HI. As for the voip by the way I have a 4 jack gateway from Grandstream on order, should be here this week. I figure if I don't use it in TO I'll use it out at our farm for remote rig control with Ham Radio Deluxe. I'll only be at 40 feet HAT so its a bit of a long haul for us but maybe some day....

73 de VE3EBC (Nick)

Hello Anthony, I was just wondering how the talk went? I just joined the list here the other day so I missed it sad to say. Here in Toronto I have a node all set up and boxed ready to go up when the wx improves. I intend to try voip among other things and there are a few others who are going to try as well to do something. This project has a bit of potential I think, we just need to get more upgraded routers in the right hands and let natural Ham curiosity take over HI HI. As for the voip by the way I have a 4 jack gateway from Grandstream on order, should be here this week. I figure if I don't use it in TO I'll use it out at our farm for remote rig control with Ham Radio Deluxe. I'll only be at 40 feet HAT so its a bit of a long haul for us but maybe some day....

73 de VE3EBC (Nick)

Hello Anthony, I was just wondering how the talk went? I just joined the list here the other day so I missed it sad to say. Here in Toronto I have a node all set up and boxed ready to go up when the wx improves. I intend to try voip among other things and there are a few others who are going to try as well to do something. This project has a bit of potential I think, we just need to get more upgraded routers in the right hands and let natural Ham curiosity take over HI HI. As for the voip by the way I have a 4 jack gateway from Grandstream on order, should be here this week. I figure if I don't use it in TO I'll use it out at our farm for remote rig control with Ham Radio Deluxe. I'll only be at 40 feet HAT so its a bit of a long haul for us but maybe some day....

73 de VE3EBC (Nick)

Hey everyone,

  Thanks,

  For showing up to the Swap-meet and coming by to see me and my wife. showing off our Broadband Hamnet with Team Talk.  It was great to see that Hams are interested. In this new mode. I hope next Time I can have a Pamphlet to give out on basic info of Broadband Hamnet.  Ie Antenna Range gain, what router to buy, aplication/services setup. how to videos. ect.

   But showing the nodes conceted and working a program sharing video and audio

Hi Waldek

I'm Kevin G7UXW. i've been testing my pi,beagleboard and routers to great effect and all is looking good. I copied your HamNET-mesh-server.png file and added some questions in red with regard to IP addressing for attached devices.. I've posted the page at www.qsl.net/g7uxw/44network.png .. This mite seem a strange way of doing things but it will put a picture in my head of what things should look like 

 This is the fastest learning curve i've been on 

73  Kevin  G7UXW 

Here is the PICO M2HP  board.info     I got a forbidden request on a quick reply  ???   Robert

XM.v5.5.6#radio.1.antenna.1.gain=0radio.1.antenna.1.name=Mainradio.1.antenna.1.id=4radio.1.def_antenna=4radio.1.antennas=1radio.1.txpower.offset=12radio.1.txpower.max=28radio.1.subvendorid=0x0777radio.1.subsystemid=0xe302radio.1.bus=pciradio.1.shortname=radio.1.name=board.phy.2.maxmtu=2024board.phy.1.maxmtu=2024board.phycount=1board.upgrade=150board.reboot=30board.hwaddr=24A43C760173board.netmodes=7board.subtype=board.shortname=p2Nboard.name=PicoStation M2board.cpurevision=0x00000101board.sysid=0xe302XM.v5.5.6# cat /etc/board.info-sh: cd: can't cd to cat/etcXM.v5.5.6# cd cat/etc
Enter 'help' for a list of built-in commands.BusyBox v1.11.2 (2013-05-28 17:52:06 EEST) built-in shell (ash)

ubnt@192.168.1.20's password:login as: ubnt

The paste does not look as it should  I'll try attaching the file.  

When attaching the file - an error says this type of file not allowed ???  I tried .txt .doc  .pdf ???

Here is the board.info from a new PICO M2HP  before I flashed it with the bullet M2HP FW,  Robert, WB6WGM.

Is it normal behaviour for HamChat to retain data from previous sessions?  Can that be easily deleted? Each time I open it, past discussions are still there.

Dick

Minor nit in the help.html file under the section of "Installing firmware with tftp".   The IP address of the Bullet you want to 'tftp' the firmware to will be 192.168.1.20 according to Ubiquiti's website.  This is also the address I used when tftp'ing the latest firmware into the Bullet I have.

The 192.168.1.1 IP address is that used by a WRT54G in the same circumstances at power up.  Maybe not always the case but I seem to recall this is what a number of Atheros-based wireless routers use. Naturally, your mileage may vary.  :)

       -Rusty- 

Yeah, the black injector/outjector(?) pairs will work great when used together but since the Bullet has the outjector built in yer gonna hafta to make sure the voltages are on the right pairs.

Rotsa Ruck Mr Rolph! :D

Anyone else around in Laurel, Maryland meshing? I've had three nodes up and running for a couple months and not seeing any activity.

Thanks for creating a Maryland page. I'll put my posting up over there. You can delete this thread if you wish.

73

Gary

I am thinking of getting started.  What I would find of most value to justify getting a couple of routers and experimenting, is the ability to build a D-Rats-like environment for chat and BBS.  My interest is in supporting events like airshows [noisy environments], marathons and EmComm [rapid deployment].  Initially I wouldn't be much interested in phone.  IP camera would be quite valuable!  I did get 'the book', I've even got a hard copy on order from Amazon.  A LOT to take in for a lowly, hard-core, end user!

Any information about applications or how others are using BB-Hamnet for event support is GREATLY appreciated,

Charles

Please see my reply and scenario under General Board.

ubject :Re:Connecting (BRIDGING) 2 mesh nodes via cat5..