And currently, it takes a total of two (2) commands to install this on a node.  Very simple.

Darryl

As AE6XE (Joe) mentioned in another thread, we are close to releasing the vtun-based virtual tunnel server and client scripts.

Here's a sneak peek into the two new admin pages in the GUI...

Attachments
 tunnel_client.png [79 KB] :: Client Web Page
 tunnel_server.png [138 KB] :: Server Web Page

For those looking for an alternative to the Netgear switches for vlan access to a ubunt node...

I have configured the EdgeRouter-PoE-5 to work with the vlan feature of bbhn v3.0.0 and it was actually quite simple.

Add a vlan in the router GUI with an address on some arbitrary private network. I used 192.168.9.1/24
Configure the node WAN settings for another address on that same network (I used 192.168.9.2) and then set the gateway to the router's plan address (192.168.9.1 in my case) and the net mask to 255.255.255.0
Reboot the node

That's it.

That document can now be found at: http://ve3wex.ddns.net/wax/files/Establishing_GRE_Tunneling_Between_v0.4.3_Broadband-Hamnet_Nodes.pdf . This method hasn't been tested with the newer BBHN software. Another document from Johan is http://ve3wex.ddns.net/wax/files/hsmm scripts GRE tunneling.pdf  73 - AL, VE3RRD

The bbhn beta test team has been testing a packaged server and client tunnel capability integrated in the bbhn setup screens. Darryl K5DLQ is making this happen with contributions from a few of us. We're working through one issue in testing the linksys implementation--ubnt is working well. This is not far off from being made available (a month?) and ultimately part of the bbhn release.

SM7I, let's snyc up separately to exchange an early version and figure out if there are any options to inter-operate? However, this is a vtun implementation.

It's a Microsoft design.

My phone won't let me paste a link but Google: windows 8.1 ADHOC not showing and you will find the details about it.

Hi, I have an active node and am able to see it in the wireless device list using

Win7 & MacOSX, but not Win 8.1.  Any thoughts why it does not appear please?

Jay, KJ6HSH

there is a fairly active Google+ community for the HSMM-Pi project located:
https://plus.google.com/communities/109339235992496491942

That's the best place to get answers on that project.

73, K5DLQ

I have flashed up an SD card for a Pi mesh node. All went well untill the final re boot. I was then asked for a  sign in  and password . I had not altered from the original details of 'admin' and 'change me' untill I was satisfied about the set up. My call sign and mesh node name have been set up. I can not now access the node. Any ideas, short of re doing the whole process.

Sounds like a similar situation which I ran into while working on streaming video over BBHN. Probably a little bit easier to stream audio than video.

Which version of RPi do you have? A or B? Have you tested the streaming audio using a regular ethernet switch to connect the RPi server to a client computer?

From what I have read about the Banana Pi computer, the hardware is supposed to be 100% compatible with the Raspberry Pi at the software level. If that would be true, then you should be able to use the Raspberry Pi Mesh net software build "as is". As I understand it, the Banana Pi is supposed to have more "horse-power under the hood" (dual core & higher clock speed). May be a good candidate for a dedicated VOIP server for Broadband Hamnet.

Hi Folks:

Just getting into this BBHN thing and think that it is pretty neat. As noted in my other post in this forum I have set a few of these up around the house to see how they work, and have begun to get to understand a few things. I would be very interested in a connection to the N2TY repeater site, as I think that would be line of site for me. 

Currently I have (2) WRT54G V1.1, (1) Raspberry Pi running HSMM-Pi as a gateway, and (1) Ubiquity Nanostation.

All running and working on the BroadbandHamnet-20-v3 SSID.

73

Todd

Vance,

Check out these pics showing how I do this:

Mesh status: https://drive.google.com/file/d/0B2bEy75HhwWhZ3NUNy03REw2Z00/view?usp=sharing Setup Services: https://drive.google.com/file/d/0B2bEy75HhwWhemxMNEQwQkNkQkE/view?usp=sharing

Joe AE6XE

To my knowledge and all the reports I have seen it is not an issue in a default install of 3.0.0 and above.

Everyone I have seen comment on it says that it works.