Has anyone used on of these on the mesh?  You can pick them up on EBAY for about $30.

I am trying to set it up serverless, but it insists on registering.

It accepts direct IP calls but won't dial one without registering.

I was able to telnet into the box and have the password for the root, but haven't found a way to bypass the register.

Any suggestions?

JJ

Google drive link

Link removed - Files are now available

Hi,  I am trying to find a 3.1.0 firmware upgrade / squashfs.bin file for a WRT54GL router to convert it over for Amateur use.  The latest upgrade is not in the repository and the software download link is down for a while after the new server upgrade.  If anyone has one they could email to me, I would appreciate it.

rlmcgill(at)suddenlink(dot)net

Randy/N7WWA

Hi Bob W8ERD,

Can you send me your and Bill's slides, as well as the hamvention map showing the node placements at: kd8nxh@qsl.net ??

Thanks and 73!

Augustine, KD8NXH

Hello!

I did a demonstration video showing the Asterisk VoIP setup I have with my local Broadband-Hamnet setup.  Right now it is only working between 3 nodes in my home, as I did this for testing purposes, but I'm hoping to have it scaled up to a much larger area soon.

https://youtu.be/2fELIh9x510

Hi Everyone,

Been keeping up with BBHN over the last couple and recently connected my network to the world-wide BBHN Tunnel Network.

Since we have lots a sun, I decided to power all of my BBHN devices with solar energy, 24/7. basically, I have a 1kw 12v battery system fed by a charge controller and 400w of solar panel.

On the network I have:

1) A HD web camera up on my tower pointed at Waikiki below me. My QTH altitude is 800 feet (240 mtrs). and approximately 3 miles (4800mtrs) from Waikiki. 

When connecting to web cam, please logon with username=guest and pw=guest.

2) Weather station web site. You can see the station in the web cam.

3) AllStar node which connects to other Hawaii and world-wide AllStar nodes to interconnect Hawaiian users from around the world. This node ties into the Hawaiian AllStar Network for local BHNN users.

4) HamChat, web server are still in the works....

Future intent is to put up a point-to-point link from my QTH to a site in Waikiki, to accommodate users who can see this sight. Some points could be as far away as 20+ miles away.

So, this is what I have going on in Honolulu Hawaii. Please come by

73 de kh6tz

wayne

You can just reboot the nodes that see it with the dual nodename.

Or just let it time out (it will correct on its own over time)

73 Jim K5KTF

So this is what rmonline says the coverage of the node that I would like to set up would be:

Is there anyone in the (hoped) coverage area who might be setting up node and could aim in my direction???

My hope is that it might be a Ubiquity(AirGrid ??).

I was helping a friend flash a router for BBHN and I  put the wrong call sign in. I went back in the admin privileges and corrected it however when other nodes look at this node, they see it as "callsign-ls1/wrong callsign" How do I get rid of the "/wrong callsign". I have some hesitation as I bricked a node recently.

Rodney, KD0EBT

Maybe try opening port 80 for the PI on the router. However you don't need this for the phone to function, it is used when you want to replace the graphics the phone uses(such as the Cisco name and logo) and some other (rarely used) features. If you take out the entry for http server in the config it should stop showing the error.

If you are replacing the logos I would love to hear about it.

Let me know if this works for you.
KE8AVJ

I am new to mesh networking and trying to set up Teamspeak3 as a first application.

When I installed Teamspeak3 64 bit server, I misunderstood the applet with the token word and closed it.  Then I ran the server and client Teamspeak3 programs.  Of course I couldn't log in without the info I had deleted.

Finally, I deleted all the files and then installed TS3 server again.  This time I saved the server name, password, and key word.  I was able to log in with the Teamspeak3 client and insert the key word.

However, the server did not recognize me as a Super Admin.  I am just a Server Admin.  Could this be because I am using the single server free version?

Also, I am struggling setting up the routers on HamNet for TS3.  I can make .jpg files of my settings so they can be inspected.

Can somebody help me get started?

73,  John  WoGN

I have installed the mIRCD server on my lap top.and I have made it available on my meshnode

(Linksys WRT54GL) it now shows up on the mesh as an advertised service however when you click on it from another node the following message appears;http://g6lvs-ventnor:6667/ seems to be unavailable not allowed to use restricted network port. The g6lvs-ventnor bit is the mesh node which is connected with my laptophosting the mIRC server. THe internet service works OK. Have I done something wrong or not done something I shoul have.

G6LVS